How to Find the Best Window Replacement Company

The best window replacement companies offer a wide selection of windows in different styles. Homeowners should also consider energy efficiency ratings and cost.

Window Replacement

If you want to change your window size, style, or shape, consider a full frame replacement rather than a pocket window. Full frame Windows North Attleboro MA install in the existing frame without nail fins.

Wood rot, caused by a fungus, can develop in wooden window frames for many reasons. When left unaddressed, rotting can affect the structural integrity of the frame itself and other wooden parts of your home, causing them to weaken over time and become compromised. The best way to prevent rot is through regular inspections. If you catch it early, it may be possible to treat the affected area with an epoxy coating.

More severe rot, however, usually means that the frame will need to be replaced. A professional woodworker can replace the rotting portions of the frame, ensuring that the replacement timber matches the existing profiles for a seamless finish. If the damage is too extensive, then a full-frame replacement will be required, which can require the removal of brickmoulds, jambs, and casings around the window.

Indicators of rot include a discolored appearance and softness in the wood. You can also test the condition of your window frames by feeling them; wood should feel hard and sturdy, rather than spongy or brittle.

There are a few ways to repair rotted wood in window frames. For minor rot, you can use wood filler epoxy to patch up the affected areas. Once sanded and painted, the epoxy can be indistinguishable from the pre-existing wood. However, this method only works when the rot has not penetrated more than about 2 inches into the frame. You can also try pushing a screwdriver into the wood to determine how far the rot extends.

If you choose to splice in fresh timber, the process can be relatively easy for professionals with the proper tools. First, you’ll need to remove the rotted sections of the frame using a utility knife or chisel. Then you’ll need to cut the replacement timber to match the measurements of the old frames, which can be done by a professional lumber supplier. Finally, the new timber will need to be spliced in, which requires careful craftsmanship to ensure a secure and sturdy connection. Alternatively, you can opt to replace the entire window. However, this can be a difficult task to do yourself and requires a windows fitter that is FENCA or Certass registered in order to give you certification upon installation.

Muntins & Mullions

Muntins and mullions are two terms that sound very similar, so it’s easy for homeowners to get them confused. However, the distinction between these exterior elements is important as it can impact your window replacement and your home’s overall aesthetic.

Essentially, muntins are vertical dividers that separate window panes, while mullions are structural components that support multiple windows in one frame. Both of these features can be either real or simulated, and they come in various patterns that match different architectural styles, window types, and personal decorating preferences.

In addition to their decorative functions, these dividing bars also help improve ventilation in homes by creating openings within larger frames. They also add depth to a window’s structure, which is especially helpful for homeowners who live in hurricane-susceptible areas.

Real or simulated, muntins and mullions can be found in many types of windows, including bay and bow windows, casement windows, and garden windows. Generally speaking, mullions are found in older houses and buildings while muntins are more common in modern-style homes.

For those who are looking to incorporate a classic or historical aesthetic, muntins and mullions offer a wide range of options. If you prefer a more contemporary and minimalist style, though, sleek and understated versions may be better suited to your tastes.

Regardless of the type of muntins or mullions you choose, it’s important to consider your maintenance preferences and budget before making your final choice. If you want to maintain the look of traditional multi-pane windows, for instance, a more elaborate design might be appropriate, while a more minimalist approach might work better for newer, energy-efficient frames.

Whether you’re looking to replace your existing windows or upgrade your current frames, a skilled professional can ensure the best results with minimal hassle. A qualified technician will thoroughly inspect the entire frame for signs of rot or moisture damage, and they’ll recommend any necessary repairs. In addition to addressing any rotted or damaged wood, they’ll ensure that your new windows fit properly and integrate seamlessly into the existing frame. Afterward, they’ll clean the frames and apply a protective seal to prevent future problems.

Paint Damage

Most replacement windows come with factory-applied coatings, including UV protection and weather resistance. This protects the frames from damaging environmental elements, and it will not require repainting over their life span. However, if you are doing a full window replacement that requires cutting into the wall to install new drywall or stucco, it’s a good idea to repaint the area after the work is complete.

If your home has old paint that is chipped or scratched, painting the frames before installing the new windows will reduce the risk of accidental damage. However, be sure to choose a high-quality alkyd primer in a neutral color and provide sufficient ventilation to avoid fume inhalation. It’s also a good idea to have a bucket of the same color paint on hand, in case any splatters or drips do occur during the window installation process.

The physical pressure exerted during the window removal and installation process can cause cracks in drywall, especially in older homes with plaster walls. These cracks can worsen over time and create water damage behind the walls. Using coverings and protective materials can minimize this risk, but it is best to discuss your concerns with your chosen installer before the work begins.

Moisture in warm, dark places can cause mold to grow, which can damage drywall and other components of the house structure. It can also produce harmful spores that can impact the health of household occupants. Removing and replacing damaged windows can help reduce moisture levels in the home, but this may not be enough to prevent future problems.

If your old windows were installed before 1978, they may contain lead paint that could become disturbed during the replacement process. This can create hazardous lead dust that is dangerous to the health of adults and children in the home. Only use a certified window replacement company that follows the EPA’s Lead Renovation, Repair and Painting rules to ensure your safety. It’s also a good idea for homeowners to remove any furniture or other items near the windows to make it easier for the installer to reach the work areas without damaging the surrounding walls.

Water Damage

While water damage isn’t as immediately apparent as wind or hail damage, it is often the root cause of many home repair problems. Window leaks can lead to mold, rotted wood framing and even structural damage. This is especially true if the leak goes undetected for an extended period of time. In order to avoid these potential issues, homeowners should inspect their windows regularly for a variety of signs that they are in need of replacement.

The first thing to look for is moisture buildup and condensation in the windows themselves. Moisture in the windows may also cause them to sag or become soft to the touch. If you notice this, you should call in a professional to examine the substructure of the window and see if there is any sign of rot or water infiltration.

Another common symptom of window leaking is a noticeable change in the color of your walls and trim around the area of the windows. This discoloration may be the result of a simple staining issue that can be addressed with repainting but is more likely to indicate a rotted window frame.

In addition to a change in color, damp walls are also a sign of a potential window leak. Dampness in the walls can encourage mold growth and create an ideal environment for pests to thrive. These unwanted guests can not only ruin your home’s appearance but also negatively impact your health and wellbeing.

If you notice the occurrence of any of these signs, it’s important to contact a professional to have your window replaced as soon as possible. Window replacement will not only replace the rotting wood but will also provide a more durable window that will not allow water to enter your home in the future.

Lastly, you should also be sure to hire an experienced window installer for your replacement project. A reputable installer will know how to manage the flow of water around and under your new windows to keep them in good shape. This is particularly important for homes in areas prone to flooding and/or severe weather.